Rauch AXEO 16.1, Инструкция по эксплуатации

Страница: 71 / 136

Machine settings
63
7
7.9 Use the fertiliser chart
7.9.1 Information on the fertiliser chart
The values in the fertiliser chart have been determined using the spreading ma-
terial test system.
The spreading material used has been purchased from the manufacturer or from
dealers. Experience shows that due to storage and transport, your spreading ma-
terial – even with identical specifications – might exhibit a different spreading be-
haviour.
This means that the settings specified in the fertiliser charts may result in a differ-
ent spreading quantity and a poorer spreading material distribution.

Always check the actual application rate by means of calibration (see chapter
7.10: Calibration, page 84 ).

Observe the setting values exactly. Even a slightly incorrect setting may ad-
versely affect the spreading pattern.

Adjustments for spreading materials not listed in the fertiliser chart can be de-
termined by means of calibration.
NOTICE
With small working widths, the spreading disc speed can be reduced. Implement
another calibration test with the new speed (RPM).
NOTICE
The operating staff is responsible for making the correct spreader adjustments
according to the spreading material used.
We point out specifically that we do not accept any liability for subsequent dam-
age resulting from incorrect spreader adjustments.