background image

Form No. WBS28051 Rev B

80lb and 100lb Walk-Behind Spreader

Part No. WBS28080

Part No. WBS28100

Owner's Manual

This spreader is designed to dispense ice-control
materials on residential or commercial properties.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.

Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.

Visit

www.bossplow.com

for product safety and

operation training materials, accessory information,
help finding a dealer, or to register your product.

Whenever you need service, genuine BOSS parts, or
additional information, contact an Authorized BOSS
Dealer or BOSS Technical Service (1-800-286-4155) .

Safety

Improperly using and maintaining the equipment
can result in injury. To reduce the potential for
injury, comply with these safety instructions
and always pay attention to the safety-alert
symbol

, which means

Caution

,

Warning

, or

Danger

—personal safety instruction. Failure to

comply with the instruction may result in personal
injury or death.

Preparation

Ensure that only trained personnel install and
perform maintenance on the equipment.

Always wear appropriate personal protective
equipment when loading, unloading, and servicing
the spreader. Wear substantial, slip-resistant
footwear, eye protection, and respiratory
protection.

Carefully read and follow the chemical warning
labels and safety data sheets (SDSs) for all
chemicals used, and protect yourself according to
the chemical manufacturer's recommendations.

Operation

Read the

Owner’s Manual

before operating or

servicing the spreader.

Overloading the spreader could result in an
accident or damage. Never exceed the capacity of
the spreader.

This spreader is restricted to the use of specified
materials only. Do not run other materials through
the spreader.

Stop the spreader before filling, servicing, or
cleaning it.

Keep bystanders and pets away from the machine
during operation.

Do not climb into or ride on the spreader.

Keep your hands, feet, and clothing away from
moving parts and mounting points.

When transporting the spreader, ensure that it is
properly secured. Instructions are available at

www.bossplow.com

.

Do not store material in the hopper.

© 2022—BOSS Products
P.O. Box 787
Iron Mountain, MI 49801

Register at www.bossplow.com.

Original Instructions (EN)

Printed in the USA

All Rights Reserved

*WBS28051*

 

Содержание WBS28080








Отзывы: