Setup
1.
Install the drive wheel onto the axle and align
the spring clip holes.
2.
Install the spring clip through the wheel and axle.
3.
Fold the spring clip to ensure that it will not fall
out.
4.
Install the coast wheel onto the axle so that the
hole in the axle is outside the rim of the tire.
5.
Install the lynch pin through the axle.
6.
Fold the lynch pin to ensure that it will not fall out.
g397097
Figure 1
7.
Remove the bolts securing the pivot bracket to
the lower handles.
8.
Put the handle shaft in between the lower
handles and secure with the hardware removed
in Step 7.
g397095
Figure 2
9.
Pull the lever back to bring the control rod down
to the pivot bracket.
10.
Remove the lower nut installed on the control
rod and insert the rod into the pivot bracket.
11.
Loosely install the nut removed in Step 10.
g397094
Figure 3
12.
Calibrate the spreader.
2
