UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 902/970
Garbage Time - Configure the Ripng garbage time.
Timeout Time - Configure the Ripng timeout time.
Default Information Originate - Enable or Disable Default Route Advertise.
Default Metric - Sets a default for the metric of redistributed routes.This field displays the
default metric if one has already been set or blank if not configured earlier. The valid
values are (1 to 15)
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is
performed.
11.2.5.10.2.
Configuring RIPv6 Interface Configuration Page
Selection Criteria
Slot/Port - Select the interface for which data is to be configured.
Configurable Data
Interface Mode - Select enable or disable from the pulldown menu. Before you enable
RIPv6 version 1 or version 1c on an interface, you must first enable network directed
broadcast mode on the corresponding interface. The default value is disable.
Passive Interface - Select enable or disable from the pulldown menu. The default value is
disable.
Command Buttons
