UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 924/970
add yet another class reference, since a specified class can reference at most one other
class of the same type. Moreover, a 'Remove Class Reference' button appears on the
screen that can be invoked to remove the current class reference.
Configurable Data
Class Name - This is a case-sensitive alphanumeric string from 1 to 31 characters
uniquely identifying a class. Class name 'default' is reserved and must not be used.
Non-Configurable Data
Class Type - Displays type of the configured class as 'all', 'any', or 'acl'. Only when a new
class is created, is this field a selector field. After class creation this becomes a
non-configurable field.
Match Criteria - Displays the configured match criteria for the specified class.
Values - Displays the values of the configured match criteria.
Command Buttons
Submit - Send the updated screen to the switch and cause the changes to take effect on
the switch but these changes will not be retained across a power cycle unless a save is
performed.
Cancel - Cancel the currently selected filter.
Delete - Delete the currently selected filter.
Rename - Allows to rename a specified class.
Add Match Criteria - Only one match criterion can be specified each time this button is
invoked. Based on the selected match criterion, an individual match criterion screen is
provided to configure its value.
NOTE: Match criteria cannot be deleted from a class. The class must be deleted in order
to remove the match criteria.
Remove Class Reference - This button appears on the screen only if a specified class
references another class. The current class reference, of the specified class, is removed
by invoking this button.
11.2.6.2.3.
Viewing DiffServ Class Summary Page
Non-Configurable Data
