UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 642/970
11.2.1.3.12.
Viewing Authentication List Summary Page
Non-Configurable Data
Authentication List - Identifies the authentication login list summarized in this row.
Method List - The ordered list of methods configured for this login list.
Login Users - The users you assigned to this login list on the User Login Configuration
screen. This list is used to authenticate the users for system login access.
802.1x Port Security Users The users you assigned to this login list on the Port Access
Control User Login Configuration screen - This list is used to authenticate the users for
port access, using the IEEE 802.1x protocol.
Command Buttons
Refresh - Update the information on the page.
11.2.1.3.13.
Defining User Login Page
Note: This page provides a user account (from those already created) to be added into
the Authentication List.
Each configured user is assigned to a login list that specifies how the user should be
authenticated when attempting to access the switch or a port on the switch. After creating a
new user account on the User Account screen, you should assign that user to a login list for the
switch using this screen and, if necessary, to a login list for the ports using the Port Access
Control User Login Configuration screen. If you need to create a new login list for the user, you
would do so on the Login Configuration screen.
The pre-configured users, admin and guest, are assigned to a pre-configured list named
defaultList, which you may not delete. All newly created users are also assigned to the
defaultList until you specifically assign them to a different list.
