UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 687/970
the corresponding line on the pull down entry field. The factory default is enabled.
Link Up/Down - Enable or disable activation of link status traps by selecting the
corresponding line on the pull down entry field. The factory default is enabled.
Multiple Users - Enable or disable activation of multiple user traps by selecting the
corresponding line on the pull down entry field. The factory default is enabled. This trap is
triggered when the same user ID is logged into the switch more than once at the same
time (either via telnet or the serial port).
Spanning Tree - Enable or disable activation of spanning tree traps by selecting the
corresponding line on the pull down entry field. The factory default is enabled.
ACL Traps - Enable or disable activation of ACL traps by selecting the corresponding line
on the pulldown entry field. The factory default is disabled.
DVMRP Traps - Enabled or disable activation of DVMRP traps by selecting the
corresponding line on the pulldown entry field. The factory default is disabled.
OSPF Traps - Enabled or disable activation of OSPF traps by selecting the
corresponding line on the pulldown entry field. The factory default is disabled. This field
can be configured only if the OSPF admin mode is enabled.
PIM Traps - Enabled or disable activation of PIM traps by selecting the corresponding
line on the pulldown entry field. The factory default is disabled.
OSPFv3 Traps - Enabled or disable activation of OSPFv3 traps by selecting the
corresponding line on the pulldown entry field. The factory default is disabled. This field
can be configured only if the OSPFv3 admin mode is enabled.
Command Buttons
Submit - Sends the updated screen to the switch and causes the changes to take effect
on the switch. These changes will not be retained across a power cycle unless a save is
performed.
