UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 406/970
must be the name of an existing MAC ACL.
An optional sequence number may be specified to indicate the order of this mac access list
relative to other mac access lists already assigned to this interface and direction. A lower
number indicates higher precedence order. If a sequence number
is already in use for this interface and direction, the specified mac access list replaces the
currently attached mac access list using that sequence number. If the sequence number is not
specified for this command, a sequence number that is one greater than the highest sequence
number currently in use for this interface and direction is used.
This command specified in 'Interface Config' mode only affects a single interface, whereas the
'Global Config' mode setting is applied to all interfaces. The VLAN keyword is only valid in the
'Global Config' mode. The 'Interface Config' mode command is only available on platforms that
support independent per-port class of service queue configuration.
Syntax
mac access-group <name> [vlan <vlan-id>] in [<1-4294967295>]
no mac access-group <name> [vlan <vlan-id>] in
no - This command removes a MAC ACL identified by <name> from the interface in a
given direction.
Default Setting
None
Command Mode
Global Config
Interface Config
6.21 CoS (Class of Service) Command
6.21.1 Show Commands
6.21.1.1 show queue cos-map
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes
for a specific interface. The slot/port parameter is optional and is only valid on platforms that
support independent per-port class of service mappings. If specified, the 802.1p mapping table
of the interface is displayed. If omitted, the most recent global configuration settings are
displayed.
Syntax
