UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 770/970
11.2.2.20.8.
Viewing LLDP Remote Device Summary Page
Non-Configurable Data
Local Interface - Specifies the local port which can receive LLDP frames advertised by a
remote system.
Chassis ID - Specifies the chassis component associated with the remote system.
Port ID - Specifies the port component associated with the remote system.
System Name - Specifies the system name of the remote system.
Command Buttons
Refresh - Updates the information on the page.
Clear - Clears LLDP Remote Device information received on all the interfaces.
11.2.2.21 Managing LLDP-MED
11.2.2.21.1.
Configuring LLDP-MED Global Configuration Page
Configurable Data
Fast Start Repeat Count - Specifies the number of LLDP PDUs that will be transmitted
when the protocol is enabled. The range is from (1 to 10). Default value of fast repeat
count is 3.
Device Class - Specifies local device's MED Classification. There are four different kinds
of devices, three of them represent the actual end points (classified as Class I Generic [IP
Communication Controller etc.], Class II Media [Conference Bridge etc.], Class III
Communication [IP Telephone etc.]). The fourth device is Network Connectivity Device,
which is typically a LAN Switch/Router, IEEE 802.1 Bridge, IEEE 802.11 Wireless Access
Point etc.
Command Buttons
