UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 428/970
7.2.1.10 show ip route static
This command displays Static Routes. The option all command displays all (best and non-best)
routes.
Syntax
show ip route static [all]
Default Setting
None
Command Mode
Privileged Exec
Display Message
Route Codes:
Displays the key for the routing protocol codes that might appear in the
routing table output.
The command displays the routing tables in the following format:
Code IP-Address/Mask [Preference/Metric] via Next-Hop, Interface
Code: The codes for the routing protocols that created the routes.
IP-Address/Mask:
The IP-Address and mask of the destination network corresponding to
this route.
Preference:
The administrative distance associated with this route. Routes with low values
are preferred over routes with higher values.
Metric:
The cost associated with this route.
via Next-Hop: The outgoing router IP address to use when forwarding traffic to the next
router (if any) in the path toward the destination
Interface: The outgoing router interface to use when forwarding traffic to the next destination
7.2.1.11 show ip route summary
This command displays the routing table summary. Use the optional all parameter to show the
number of all routes, including best and non-best routes. To include only the number of best
routes, do not use the optional parameter.
Syntax
show ip route summary [all]
Default Setting
None
Command Mode