UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 738/970
Slot/Port - The select box lists all Slot/Ports.Select the interface for which you want
Multicast Router to be enabled
Configurable Data
VLAN ID - VLAN ID for which the Multicast Router Mode is to be Enabled or Disabled.
Multicast Router - For the Vlan ID, multicast router may be enabled or disabled using
this.
Command Buttons
Submit - Update the switch with the values you entered.
11.2.2.13.9.
Configuring L2 Static Multicast Group Configuration Page
Non-Configurable Data
MAC Filter - This is the list of MAC address and VLAN ID pairings for all configured L2
Mcast Groups. To change the port mask(s) for an existing L2Mcast Group, select the entry
you want to change. To add a new L2Mcast Group, select "Create Filter" from the top of
the list.
Configurable Data
MAC Address - The MAC address of the L2Mcast Group in the format 01:00:5E:xx:xx:xx.
You can only change this field when you have selected the "Create Filter" option.
You cannot define L2Mcast Group for these MAC addresses:
00:00:00:00:00:00
33:33:00:00:00:01 to 33:33:00:00:00:FF
FF:FF:FF:FF:FF:FF
VLAN ID - The VLAN ID used with the MAC address to fully identify packets you want
L2Mcast Group. You can only change this field when you have selected the "Create Filter"
option.
Solt/Port(s) - List the ports you want included into L2Mcast Group.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain
the new values across a power cycle you must perform a save.
Delete - Remove the currently selected L2Mcast Group.
