UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 916/970
MAC ACL - Select the MAC ACL for which to create or update a rule.
Rule - Select an existing rule or select 'Create New Rule' to add a new Rule. New rules
cannot be created if the maximum number of rules has been reached. For each rule, a
packet must match all the specified criteria in order to be true against that rule and for the
specified rule action (Permit/Deny) to take place.
Configurable Data
Rule - Enter a whole number in the range of (1 to 8) that will be used to identify the rule.
Action - Specify what action should be taken if a packet matches the rule's criteria. The
choices are permit or deny.
Logging - When set to 'True', logging is enabled for this ACL rule (subject to resource
availability in the device). If the Access List Trap Flag is also enabled, this will cause
periodic traps to be generated indicating the number of times this rule was 'hit' during the
current report interval. A fixed 5 minute report interval is used for the entire system. A trap
is not issued if the ACL rule hit count is zero for the current interval. This field is visible for
a 'Deny' Action.
Assign Queue ID - Specifies the hardware egress queue identifier used to handle all
packets matching this ACL rule. Valid range of Queue Ids is (0 to 6).
Mirror Interface - Specifies the specific egress interface where the matching traffic
stream is copied in addition to being forwarded normally by the device. This field cannot
be set if a Redirect Interface is already configured for the ACL rule. This field is visible for
a 'Permit' Action.
Redirect Interface - Specifies the specific egress interface where the matching traffic
stream is forced, bypassing any forwarding decision normally performed by the device.
CoS - Specifies the 802.1p user priority to compare against an Ethernet frame. Valid
range of values is (0 to 7).
Secondary CoS - Specifies the Secondary 802.1p user priority to compare against an
Ethernet frame. Valid range of values is (0 to 7).
Destination MAC - Specifies the destination MAC address to compare against an
Ethernet frame. Valid format is (xx:xx:xx:xx:xx:xx). The BPDU keyword may be specified
using a Destination MAC address of 01:80:C2:xx:xx:xx.
Ethertype Key - Specifies the Ethertype value to compare against an Ethernet frame.
Valid values are
Appletalk
ARP
IBM SNA
IPv4
IPv6
IPX
