UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 585/970
<areaid> - is an IPv6 address, formatted as a 4-digit dotted-decimal number or a decimal
value in the range of <0-4294967295>.
Default Setting
None
Command Mode
Interface Config
9.4.2.3
ipv6 ospf cost
This command configures the cost on an OSPF interface. The <cost> parameter has a range
of 1 to 65535.
Syntax
ipv6 ospf cost <1-65535>
no ipv6 ospf cost
<no> - This command configures the default cost on an OSPF interface.
Default Setting
None
Command Mode
Interface Config
9.4.2.4
ipv6 ospf dead-interval
This command sets the OSPF dead interval for the specified interface. The value for
<seconds> is a valid positive integer, which represents the length of time in seconds that a
router's Hello packets have not been seen before its neighbor routers declare that the router is
down. The value for the length of time must be the same for all routers attached to a common
network. This value should be some multiple of the Hello Interval (i.e. 4). Valid values range for
<seconds> is from 1 to 2147483647.
Syntax
ipv6 ospf dead-interval <seconds>
