UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 896/970
11.2.5.8.12.
Configuring OSPFv3 Route Redistribution Configuration Page
This screen can be used to configure the OSPFv3 Route Redistribution parameters. The
allowable range for each field is displayed next to it. If an invalid value is entered in one or
multiple fields, an alert message will be displayed with the list of all the valid values.
Configurable Data
Configured Source - This dynamic select list is populated by only those Source Protocols
that have already been configured for redistribution by OSPFv3. However, the topmost
option in the select box is "Create", and this allows the user to configure another, among
the Available Source Protocols. The valid values are 'Static' and 'Connected'. An additional
'Create' option is also available.
Available Source - This dynamic select list is populated by only those Source Protocols
that have not previously been configured for redistribution by OSPFv3. This select box
would appear only if the user selects "Create" option as Configured Source. The valid
values are 'Static' or 'Connected'.
Metric- Sets the metric value to be used as the metric of redistributed routes. This field
displays the metric if the source was pre-configured and can be modified. The valid values
are (0 to 16777214)
Metric Type - Sets the OSPFv3 metric type of redistributed routes.
Tag - Sets the tag field in routes redistributed. This field displays the tag if the source was
pre-configured, else a default tag value of 0 is displayed. The valid values are (0 to
4294967295)
Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect
immediately.
Delete - Delete the entry of the Source Protocol selected as Configured Source from the
list of Sources configured for OSPFv3 Route Redistribution.
