UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 307/970
This command configures the Voice VLAN capability on the interface.
Syntax
voice vlan { vlanid <id> | dot1p <priority> | none | untagged }
no voice vlan
no - This command disables the Voice VLAN capability on this switch.
vlan-id : Configure the IP phone to forward all voice traffic through the specified VLAN.
dot1p : Configure th IP phone to use 802.1p priority tagging for voice traffic and to use the
default native VLAN (0) to carry all traffic. The valid <priority> range is 0 to 7.
none : Allow the IP phone to use its own configuration to send untagged voice traffic.
untagged : Configure the phone to send untagged voice traffic.
Default Setting
Disabled
Command Mode
Global Config
6.11.2.6 voice vlan data priority
Use this command to either trust or entrust the data traffic arriving one the Voice VLAN port.
Syntax
voice vlan data priority untrust | trust
Default Setting
trust
Command Mode
Global Config
