UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 369/970
Restrictions The class types of both <classname> and <refclassname> must be identical
(that is, any vs. any, or all vs. all). A class type of acl is not supported by this command.
Cannot specify <refclassname> the same as <classname> (that is, self-referencing of class
name not allowed). At most one other class may be referenced by a class. Any attempt to
delete the <refclassname> class while still referenced by any <classname> shall fail.
The combined match criteria of <classname> and <refclassname> must be an allowed
combination based on the class type. Any subsequent changes to the <refclassname> class
match criteria must maintain this validity, or the change attempt shall fail. The total number of
class rules formed by the complete reference class chain (includes both predecessor and
successor classes) must not exceed a platform-specific maximum. In some cases, each
removal of a refclass rule reduces the maximum number of available rules in the class
definition by one.
6.18.2.6 no match class-map
This command removes from the specified class definition the set of match conditions defined
for another class.
Syntax
no match class-map <refclassname>
<refclassname> is the name of an existing DiffServ class whose match conditions
are being referenced by the specified class definition.
Note: There is no [not] option for this match command.
Default
None
Command Mode
Class-Map Config
6.18.2.7 match cos
This command adds to the specified class definition a match condition for the Class of Service
value (the only tag in a single tagged packet or the first or outer 802.1Q tag of a double VLAN
tagged packet). The value may be from 0 to 7.
NOTE: This command is not available on the Broadcom 5630x platform.
