UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 358/970
This command use to determine whether another computer is on the network. To use the
command, configure the switch for network (in-band) connection. The source and target
devices must have the ping utility enabled and running on top of TCP/IP. The switch can be
pinged from any IP workstation with which the switch is connected through the default VLAN
(VLAN 1), as long as there is a physical path between the switch and the workstation. The
terminal interface sends three pings to the target station. Use the <ipv6-address> parameter to
ping an interface by using the global IPv6 address of the interface. Use the optional size
keyword to specify the size of the ping packet.
Syntax
ping ipv6 <ipv6-address> [size <datagram-size>]
<ipv6-address> - A global IPv6 address.
<datagram-size> - Datagram size. Range 48 - 2048.
Default Setting
None
Command Mode
Privileged Exec
6.17.7.3 ping ipv6 interface
This command use to determine whether another computer is on the network. To use the
command, configure the switch for network (in-band) connection. The source and target
devices must have the ping utility enabled and running on top of TCP/IP. The switch can be
pinged from any IP workstation with which the switch is connected through the default VLAN
(VLAN 1), as long as there is a physical path between the switch and the workstation. The
terminal interface sends three pings to the target station. Use the interface keyword to ping an
interface by using the link-local address. You can use a loopback, tunnel, or logical interface as
the source. Use the optional size keyword to specify the size of the ping packet.
Syntax
ping ipv6 interface {<slot/port> | tunnel <tunnel-id>} | loopback <loopback-id>}
{<link-local-address>} [size <datagram-size>]
<slot/port> - Specify the interface.
<tunnel-id > - Specify the Tunnel ID. Range 0 -7.
