UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 908/970
not be offered. To configure specific match criteria for the rule, remove the rule and
re-create it, or re-configure 'Match Every' to 'False' for the other match criteria to be
visible.
Protocol Keyword - Specify that a packet's IP protocol is a match condition for the
selected IP ACL rule. The possible values are ICMP, IGMP, IP, TCP, and UDP. Either the
'Protocol Keyword' field or the 'Protocol Number' field can be used to specify an IP
protocol value as a match criterion.
Protocol Number - Specify that a packet's IP protocol is a match condition for the
selected IP ACL rule and identify the protocol by number. The protocol number is a
standard value assigned by IANA and is interpreted as an integer from 1 to 255. Either
the 'Protocol Number' field or the 'Protocol Keyword' field can be used to specify an IP
protocol value as a match criterion.
Source IP Address - Enter an IP address using dotted-decimal notation to be compared
to a packet's source IP Address as a match criteria for the selected IP ACL rule.
Source Wildcard Mask - Specify the IP Mask in dotted-decimal notation to be used with
the Source IP Address value.
Source L4 Port Keyword - Specify a packet's source layer 4 port as a match condition
for the selected extended IP ACL rule. This is an optional configuration. The possible
values are DOMAIN, ECHO, FTP, FTPDATA, HTTP, SMTP, SNMP, TELNET, TFTP, and
WWW. Each of these values translates into its equivalent port number, which is used as
both the start and end of the port range.
Source L4 Port Number - Specify a packet's source layer 4 port as a match condition for
the selected extended IP ACL rule. This is an optional configuration.
Destination IP Address - Enter an IP address using dotted-decimal notation to be
compared to a packet's destination IP Address as a match criteria for the selected
extended IP ACL rule.
Destination IP Mask - Specify the IP Mask in dotted-decimal notation to be used with the
Destination IP Address value.
Destination L4 Port Keyword - Specify the destination layer 4 port match conditions for
the selected extended IP ACL rule. The possible values are DOMAIN, ECHO, FTP,
FTPDATA, HTTP, SMTP, SNMP, TELNET, TFTP, and WWW. Each of these values
translates into its equivalent port number, which is used as both the start and end of the
port range. This is an optional configuration.
Destination L4 Port Number - Specify a packet's destination layer 4 port number match
condition for the selected extended IP ACL rule. This is an optional configuration.
Service Type - Select a Service Type match condition for the extended IP ACL rule from
the pulldown menu. The possible values are IP DSCP, IP precedence, and IP TOS, which
are alternative ways of specifying a match criterion for the same Service Type field in the
IP header, however each uses a different user notation. After a selection is made the
appropriate value can be specified.
