UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 367/970
documentation for the valid ACL number range). A matchaccess-group class type copies its
set of match criteria from the current rule definition of the specified ACL number. All elements
of a single ACL Rule are treated by DiffServ as a grouped set, similar to class type all. For any
class, at least one class match condition must be specified for the class to be considered valid.
Note: The class match conditions are obtained from the referenced access list at the time of
class creation. Thus, any subsequent changes to the referenced ACL definition do not affect
the DiffServ class. To pick up the latest ACL definition, the DiffServ class must be deleted and
recreated. This command may be used without specifying a class type to enter the Class-Map
Config mode for an existing DiffServ class.
Note: The CLI mode is changed to Class-Map Config when this command is successfully
executed.
Command Mode
Global Config
6.18.2.2 no class-map
This command eliminates an existing DiffServ class.
Syntax
no class-map <class-map-name>
<class-map-name> is the name of an existing DiffServ class.
Note: The class name 'default' is reserved and is not allowed here. This command may be
issued at any time; if the class is currently referenced by one or more policies or by any other
class, this deletion attempt shall fail.
Command Mode
Global Config
6.18.2.3 class-map rename
This command changes the name of a DiffServ class.
Syntax
class-map rename <class-map-name> <new-class-map-name>
<class-map-name> is the name of an existing DiffServ class.
