QNAP VIOSTOR, Руководство пользователя

Страница: 164 / 387

164
7.1.3 Event Management
The NVR provides ‘Traditional Mode’ and ‘Advanced Mode’ for event management.
Select ‘Traditional Mode’ to use the standard alarm settings in response to the alarm
events. To use advanced event management, select ‘Advanced Mode’.
Traditional Mode
1. Alarm Settings
Select a channel (IP camera/video server) on the list and configure the alarm
settings. The video recording will be activated when the alarm input of the
selected channel is triggered or a moving object is detected.
When the option ‘Activate alarm recording only on selected schedule’ is enabled,
the alarm recording will be activated only when the alarm input is triggered or a
moving object is detected within the schedule. To apply the same settings to
all the channels on the list, click ‘Apply to all cameras’.
Note:

All the settings will be effective after clicking ‘Apply’. When applying the
changes, the current recording process will temporarily pause (maximum 1
minute) and then restart.

To avoid blocking by the firewall, the IP cameras or the video servers configured
for alarm recording must be located on the same subnet as the NVR.

To switch from traditional mode to advanced mode, select ‘Advanced Mode’ and
click ‘Go to the settings page’.