QNAP VIOSTOR, Руководство пользователя

Страница: 125 / 387

125
and floor and then select Dewarping mode, including Panorama (Full View),
Panorama (Dual View), and Rectangle.
Remark 1: If the Mount type is Wall, only Panorama (Full View), and Rectangle
are supported in Dewarping mode.
Remark 2: If Dewarping mode is Rectangle, you can use PTZ control panel to
operate PTZ functions, excluding digital zoom.
2. Applied to the specific camera models with panomorph lens.
Before using this feature, you need to select the ‘Enable panomorph support’
option in the camera configuration page. Right click the channel and enable
the feature. After that, you can select Mount type, including wall, ceiling, and
floor and then select Dewarping mode, including Perimeter mode, Quad mode,
and PTZ mode.
Remark 1: To know the camera models which can be installed with panomorph
lens, please visit
http://www.qnapsecurity.com/n/en/qa/con_show.php?op=showone&cid=128 .
Remark 2: The function is only available when the resolution of the video
stream is higher than 640x480 on the monitoring page.
Remark 3: If Dewarping mode is PTZ mode, for the channel, you can use PTZ
control panel or mouse (by clicking and holding down the mouse left button,
and then moving the mouse or turning the mouse wheel) to change viewing
angles or zooming in/out the screen. If Dewarping mode is Quad mode, the
above methods can also be applied to operate PTZ functions in each divided
screen.