Main Air Filter/ Regulator (Combo):
Protects machine components by
filtering and regulating the air going into the machine. Acts as a water trap and
needs to be drained and/or cleaned periodically.
Main Air Regulator:
The main air regulator is an adjustable device attached to
the air source of the machine. The regulator reduces the air flow to a constant
rate. This is done in order to protect the components of the machine by
restricting the volume at which air enters the system and to maintain air
pressure at a level suitable for the devices.
Manual Dump Valve:
A pneumatic energy isolating valve, required by OSHA
(29 CFR 1910.147). In the exhausting position, isolates the machine from
incoming main air. To prevent accidental start-ups while cleaning or servicing
the machine, this valve can be physically locked out and/or labeled with a
warning tag while in the exhaust position.
Motor:
A device that converts electrical energy into mechanical energy using
forces exerted by magnetic fields on current-carrying conductors.
Open Depth:
The inside dimension of the case, from the bottom of the case to
the top of the open flaps.
Photocell
: A sensor used to detect either carriers or cases. Used to indicate an
action has been accomplished, and that another action can now take place.
Pushbuttons
: A device for opening and closing or for changing the connection
of a circuit.
Reflector, Photocell:
A reflective disk or strip used with a photocell to reflect a
beam emitted by the photocell.
Regular Slotted Case (RSC):
A type or style of case. This case will have open
flaps that remain in the open or upward direction during the packaging process.
Relays:
An electromagnetic device for remote or automatic control that is
actuated by variation in conditions of an electric circuit and that, in turn,
operates other devices (as switches) in the same or a different circuit
.
RSC Tab Lock:
A type or style of case. This case will have top flaps folded
around the body of the case and held by tabs during the packaging process.
Score Lines:
The pre-positioned indentations or perforations.
Skewing:
The placement of the glued joint and if the joint is properly
positioned, maintaining the design specification of the case.
Operations Manual
CE35-T Case Erector
M-CE35T-2c Horiz Mag
3/2/2010
G
lo
s
s
a
ry
127
