manualshive.com logo in svg

Paradyne FrameSaver SLV 9664, Руководство пользователя

Построенный на инновационной технологии Paradyne FrameSaver SLV 9664 обеспечивает надежную защиту вашего устройства. Для получения подробной информации об использовании рекомендуется скачать бесплатное руководство пользователя с нашего веб-сайта. Не упустите возможность загрузить его сейчас с manualshive.com.

Поделиться
Скачать
background image

Configuration

 3-12

9664-A2-GB20-00

March 2000

NOTE:

If 1MPort (the default) is not the setting required for your application, change
the Frame Relay Discovery Mode before connecting the network cable or
editing discovered option settings. Otherwise, the FrameSaver unit will start
“discovering” DLCIs as soon as it powers up.

To recover from this problem, edit a selected “discovered” DLCI or PVC
connection manually if any DLCIs or PVC Connections have been configured
manually. If only a local management PVC between the router and the
FrameSaver unit has been configured, select the desired Frame Relay
Discovery Mode and Save the change.

The default discovery mode is 1MPort (management DLCIs multiplexed with data
DLCIs on Port-1, which creates two embedded DLCIs [EDLCIs] – one EDLCI for
Port-1 user data, and another EDLCI for management data); that is, for each
DLCI discovered on the network, a multiplexed network DLCI and a standard
data port DLCI will be configured and connected, and a Management PVC will be
embedded in the network DLCI. When LMI is active on the network interface and
PVC status information (with provisioned DLCI numbers) is next received from
the network, the unit automatically saves the settings to the Current Configuration
area.

Configuration options set by the selected discovery mode can be manually
modified, refined, or deleted at any time using the Configuration menus.
No previously discovered and configured DLCIs or cross-connections will be
removed unless authorized or Automatic Circuit Removal is enabled (see

Automatically Removing a Circuit

). Additional discovered DLCIs will be configured

according to the current Frame Relay Discovery Mode setting. Selecting or
changing the setting will not affect IP Addresses or Subnet Masks.

NOTE:

When auto-configuration creates a multiplexed DLCI, but a standard DLCI is
needed, change the DLCI to standard from the network DLCI Records
screen: 

Configuration

→

Network

→

DLCI Records

Содержание FrameSaver SLV 9664

















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для FrameSaver SLV 9664

National Instruments SCXI-1121 User Manual preview
SCXI-1121
Бренд: National Instruments Страницы: 162
Eaton APS6-400 Series Installation And Operation Manual preview
APS6-400 Series
Бренд: Eaton Страницы: 114
ZyXEL Communications P-974H - V3.70 Manual preview
P-974H - V3.70
Бренд: ZyXEL Communications Страницы: 116
Watchguard XTM 850 Hardware Manual preview
XTM 850
Бренд: Watchguard Страницы: 30
Aztech DSL5068EN(1T1R) User Manual preview
DSL5068EN(1T1R)
Бренд: Aztech Страницы: 40
WABCO CAN Router Manual preview
CAN Router
Бренд: WABCO Страницы: 29
AIC SB401-MN User Manual preview
SB401-MN
Бренд: AIC Страницы: 88
US Robotics uShare USR8710 User Manual preview
uShare USR8710
Бренд: US Robotics Страницы: 180
ZyXEL Communications Prestige 2864I Getting Started preview
Prestige 2864I
Бренд: ZyXEL Communications Страницы: 8
SeaLevel 2423 User Manual preview
2423
Бренд: SeaLevel Страницы: 25
National Instruments NI ELVIS III Getting Started preview
NI ELVIS III
Бренд: National Instruments Страницы: 37
Jatontec JT4500H Quick User Manual preview
JT4500H
Бренд: Jatontec Страницы: 13
Billion BiPAC 7560G Specifications preview
BiPAC 7560G
Бренд: Billion Страницы: 2
SEOWON INTECH SWC-2100 (VoIP CPE) User Manual preview
SWC-2100 (VoIP CPE)
Бренд: SEOWON INTECH Страницы: 46
Extron electronics RGB 460xi FSR Series Installation Manual preview
RGB 460xi FSR Series
Бренд: Extron electronics Страницы: 9
LevelOne WAB-2000 User Manual preview
WAB-2000
Бренд: LevelOne Страницы: 77
Crestron QM-IEM Installation Manual preview
QM-IEM
Бренд: Crestron Страницы: 8
Asus PCI-N10 User Manual preview
PCI-N10
Бренд: Asus Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды