![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390026.webp)
Part Names and Functions
24
ZW User's Manual
Front view
●
Display
●
Control panel
No.
Names (light color)
Functions
1
HIGH indicator (orange)
The HIGH indicator is lit while judgment is resulted in HIGH (HIGH threshold value <
measured value).
2
PASS indicator (green)
The PASS indicator is lit while judgment is resulted in PASS (LOW threshold value
measured value
HIGH threshold value).
3
LOW indicator (orange)
The LOW indicator is lit while judgment is resulted in LOW (measured value < LOW
threshold value).
4
STABILITY indicator (green)
The STABILITY indicator is lit while a measured value is within the measuring range.
It goes out if a measured value is out of the measuring range.
5
ZERO indicator (green)
The Zero Reset indicator is lit while the zero reset function is enabled.
6
ENABLE indicator (green)
The ENABLE indicator lights when the Sensor is ready for measurement. It goes off when
measurement is not possible (e.g. when the received light amount is excessive or
insufficient, when the measuring range is exceeded, when the calibration ROM is not
connected, or when measurement is not being performed in FUN mode).
7
Main display (red)
The main display shows measured values and/or function names.
8
Sub-display (green)
The sub-display shows additional information for measured values or setting values for
functions.
9
RUN indicator (green)
The RUN indicator is lit in the RUN mode, and goes out in the FUN mode.
10
THRESHOLD-L indicator
(orange)
The LOW threshold value indicator is lit when the Sub-display indicates a LOW threshold
value.
11
THRESHOLD-H indicator
(orange)
The HIGH threshold value indicator is lit when the Sub-display indicates a HIGH threshold
value.
No.
Names
Functions
12
ZERORST/ESC key
These keys function differently depending on operation modes.
9-2 Functions of Operating Keys p.220
13
(LEFT) key
(RIGHT) key
(UP) key
(DOWN) key
14
ZERO/SET key
15
Mode switching key
Содержание ZW-C1*T
