![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390268.webp)
Connecting Parallel I/O
266
ZW User's Manual
5
Select monitor focus ON/OFF.
The current setting value is displayed on the sub-display.
Press
/
key to enter editing mode and the sub-display blinks.
In this example, select "ON" and press the
key.
6
Set the distance value of the 1st point.
The current setting value is displayed on the sub-display.
Press
/
key to enter editing mode and the sub-display blinks.
In this example, select "4mA" and press the
key.
7
Set the output value of the 1st point.
The current setting value is displayed on the sub-display.
Press
key to enter the editing mode, and the sub-display blinks.
To edit numerical values, use the
/
/
/
keys.
In this example, input "0", then press the
key.
8
The decimal point is displayed.
Press the
/
key to move the decimal point.
Determine the decimal point and then press the
key.
9
Set the distance value of the 2nd point.
The current setting value is displayed on the sub-display.
Press
/
key to enter editing mode and the sub-display blinks.
In this example, select "20mA" and press the
key.
10
Set the output value of the 2nd point.
The current setting value is displayed on the sub-display.
Press
key to enter the editing mode, and the sub-display blinks.
To edit numerical values, use the
/
/
/
keys.
In this example, input "6", then press the
key.
11
The decimal point is displayed.
Press the
/
key to move the decimal point.
Determine the decimal point and then press the
key.
12
"OK/CAN" is displayed on the sub-display.
Press the
key to reflect the settings or the
key to cancel.
13
Press the
key for two seconds to enter the RUN mode.
Steps
Key operation
Display
Description
Содержание ZW-C1*T
