Omron ZW-C1*T, Руководство пользователя, Страница: 148 / 322

Parallel I/O connection
146
ZW User's Manual
Settings for Binary Output
The following describes the settings for outputting the current measurement results and judgment values from
the binary output of the 52-pole extended connector.
Output content setting
Sets the output content for binary output.
Output format
When the measured value is output
Outputs the measured value as a 21-bit binary number (2's complement).
(Example1)
When the measured value is "+1.23456" (The number of digits after the decimal point is the default (5 digits).)
123456 (decimal)

000011110001001000000 (binary)
(Example2)
When the measured value is "-1.23456"
-123456 (decimal)

111100001110111000000 (binary)
When the judgment is output
Item Setting item Setting value Description
Binary output Output object Off
(Default value) No binary output.
Measurement value 1 Sets whether or not there is output for each task.
The measured value for the task selected here is output as
binary for each measurement cycle.
Measurement value 2 The measured value for the task selected with the
BINARY_SEL input (See p.136) is output.
Judgment value Outputs the judgment result.
When multiple tasks are output continuously, the currently output task number is output in the BINARY_OUT output.
Binary output task number output p.136
Note
HIGH
PASS
LO W
b 0/3/6
b 1/4/7
b 2/5/ 8
Item Details Bit
b 15 b 14 b 13 b 12 b 11 b 10 b 9 b8 b 7 b 6 b 5 b 4 b 3 b 2 b 1 b 0
b 2 b 1
b 0
LO W HIGH PASS
b 20 b 19 b 1 8 b 17 b 16
TASK4
J u dgment
res u lt
TASK2
J u dgment
res u lt
TASK3
J u dgment
res u lt
T u rns O N w hen the j u dgment res u lt is HIGH.
T u rns O N w hen the j u dgment res u lt is PASS.
T u rns O N w hen the j u dgment res u lt is LO W .