![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390222.webp)
Functions of Operating Keys
220
ZW User's Manual
9-2 Functions of Operating Keys
The following table lists the names and functions of the operating keys on the Sensor Controller:
Name
Function
RUN Mode
FUN Mode
(LEFT) key
(RIGHT) key
Changes sub-display content.
Functions differently depending on the settings.
• Function display switching
• Numerical value digit selection
• Setting cancellation
(UP) key
(DOWN) key
key: Executes TIMING input.
key: Executes RESET input.
* These keys are available only if key
inputs for the hold functions have
been enabled in the FUN mode.
Performing Hold with
a Key Input p.99
Functions differently depending on the settings.
• Selection menu switching
• Setting value selection
Mode switching key
Hold down for at least two seconds
to enter the FUN mode.
Hold down for at least two seconds to enter the
RUN mode.
• For operating mode switching, "SWITCH" is
displayed on the main display and "OK/CAN" is
displayed on the sub-display. Press the ZERO/
SET key to switch the mode.
• When the mode is switched from FUN mode to
RUN mode, "SAVE" is displayed on the main
display and "OK/CAN" is displayed on the sub-
display.
Press the ZERO/SET key to save the settings
and switch the operating mode.
Press the ZERORST/ESC key to switch the
operating mode without saving the settings.
If you press for less than 2 seconds, the display
shifts to RUN mode task switching and the
threshold value setting menu.
Also, this starts teaching to set threshold values
when setting a threshold value.
ZERO/SET key
Executes a zero reset.
Functions differently depending on the selections.
• Application of selection conditions and numeri-
cal values
• Switching to lower menus
ZERORST/ESC key
Hold down for at least two seconds
to cancel a zero reset.
Functions differently depending on the selections.
• Cancellation of selection conditions and numer-
ical values
• Switching to upper menus
Hold down for at least two seconds to jump to the
top menu on the FUN mode.
Содержание ZW-C1*T
