![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390248.webp)
Setting the Output Conditions
246
ZW User's Manual
Performing Hold with a Key Input
Press the
/
key on the Sensor Controller to enable the TIMING or RESET input.
• TIMING input is ON while the
key is pressed.
•
• RESET input is ON when the
key is pressed.
Note that the key input is disabled in the default setting. Set the following when using this function.
Steps
Key operation
Display
Description
1
Press and hold the
key for two seconds to enter the FUN
mode.
2
Press the
/
keys to select "SYSTEM" and press the
key.
3
Press the
/
keys to select "KEY.IN" and press the
key.
4
Enable the key input.
The current setting value is displayed on the sub-display.
Press
/
key to enter editing mode and the sub-display blinks.
Select "ON" and press the
key.
5
Press the
key for two seconds to enter the RUN mode.
The above settings are also possible using the personal computer tools.
Performing Hold with a Key Input p.99
Note
Содержание ZW-C1*T
