Omron ZW-C1*T, Руководство пользователя, Страница: 96 / 322

Setting the Output Conditions
94
ZW User's Manual
Setting Hold
Set the hold conditions of the measured value.
The hold function holds (retain) any value from the measured values during the specific time (sampling period),
such as the maximum or minimum value.
Setting the Hold Mode
Set the hold mode of the measured value.
Item Setting item Setting value Description
Hold Hold mode Peak Holds the "maximum value" of the sampling period. Output changes after
sampling, and this state is held until the next sampling ends.
Bottom Holds the "minimum value" of the sampling period. Output changes after
sampling, and this state is held until the next sampling ends.
Peak to Peak Holds the "difference between the maximum value and the minimum value" of
the sampling period. Mainly select this when detecting vibration, for example.
Output changes after sampling, and this state is held until the next sampling
ends.
Auto Peak Holds the "maximum value" of the measurement result. The output changes
every time the maximum value is updated.
Auto Bottom Holds the "minimum value" of the measurement result. The output changes
every time the minimum value is updated.
Current
measured value
Output
Max.value
Sampling period
Current
measured value
Output
Min.value
Sampling period
Current
measured value
Output
(Max.value -
Min.value)
Max.value
Sampling period
Min.value
Current
measured value
Output
(Max.value)
Current
measured value
Output
(Min.value)