Setting I/O
ZW-8000/7000/5000
User's Manual
177
4
Settin
gs for Function
Setting the non-measurement conditions
The measurement value can be set to the clamp value when there is an unexpected number of edges or
reflection power due to the state of the light reception waveform.
At this time, "------" is displayed on the controller's main display.
* With ZW-7000
@
/5000
@
, this setting is not possible.
Multi View Explore
: [Bank Group] | [(Bank Data Name)] (double click)
→
Edit pane
: [I/O Settings] icon (
)
→
I/O Setting Screen
: [Non-Measuring Specification]
Setting item
Setting value
Description
Reflection power ON/OFF
When set to ON, the measurement value
is set to the clamp value when less than
the set reflection power threshold.
Reflective power
threshold
1 to 1000
Set the reflection power threshold value.
Reflection power is the strength of light
returning from the workpiece.
Number of Edge ON/OFF
When set to ON, if the set edge number
condition is not met, the measurement
value is set to the clamp value.
Condition for
number of Edge
surface/ 2 surface /3 surface /4 surface /Edge 5 or more
Set the edge number condition.
Comparison
condition of
number of Edge
(Condition for number of Edge) = (Observed number of Edge)/
(Condition for number of Edge)
≤
(Observed number of Edge)/
(Condition for number of Edge)
≥
(Observed number of Edge)
Set the edge number comparison
condition.
1
Set the operating mode to the FUNC mode.
3-2 Switching operation modes p.98
2
Set the condition of the non-measurement
value at [Non-Measuring Specification].
3
Set [Reflective power threshold], [Condition for number of Edge] and [Comparison condition of
number of Edge].
Содержание ZW-7000 Series
