manualshive.com logo in svg

Omron ZW-7000 Series, Руководство пользователя

Поделиться
Скачать
Omron ZW-7000 Series Скачать руководство пользователя страница 42

Basic Operations for Displaying Measurement Results

40

ZW-8000/7000/5000 

User's Manual

For ZW-5000 Series

1

Turn the threaded section of the fiber cable counter-clockwise. When the screw comes off, pull 

the cable out.

• Handling fiber cables

 

Use them in compliance with the following. This may result in damage to the fiber cable.

- Fiber cable bend radiuses must be at least 20 mm.
- Do not yank hard on a fiber cable.
- Do not step on a fiber cable or place anything heavy on it.
- Do not apply any twisting stress to the fiber cable.
- Do not forcefully insert, or bend, or twist in a manner that would cause stress on the fiber connector when 

connecting it.

- Do not let bending cause stress at the root section of a fiber connector and connection.

• Do not touch the end surface of a fiber cable, or the cable may be degraded in performance. Should the end surface 

be touched or soiled, wipe the dirt away using a commercially available cleaner exclusive for fiber or dry and soft 

cloth. Do not use a cloth moistened with alcohol, or the dirt may be reattached.

• Use the optional ZW-XCL or a commercially available fiber cleaner when cleaning the sensor controller fiber 

connector. For how to clean the fiber connector using ZW-XCL, refer to the 

Cleaning the fiber connector and fiber 

cable using ZW-XCL

.

• If you frequently insert and extract the Sensor Head, recommend to use the commercially available fiber cleaner 

which can use repeatedly.

●

 

ZW-7000 Series

●

 

ZW-8000/5000 Series

Product name

Model

Manufacture

NEOCLEAN-M

ATC-NE-M1

NTT Advanced Technology Corporation

Product name

Model

Manufacture

OPTIPOP R1

ATC-RE-01

NTT Advanced Technology Corporation

Important

Содержание ZW-7000 Series

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды