Omron ZW-7000 Series Скачать руководство пользователя страница 95

Страница: 95 / 336

sta
llatio

Con

nection

Saving a project

ZW-8000/7000/5000
User's Manual

2-8 Saving a project

Saving a project

Save the project being edited with the PC tool.

The project to be saved has the following information.

• Save a project data when the setting of the Sensor Controller is changed. If the power is turned off without saving,

the changed setting is cleared.

Saving the Bank/System Settings p.185

Menu bar: Click [File] - [Save] to select.

Exporting a project

A project data (.smc) can be exported.

The exported data can be used by importing with the other personal computer's PC tool.

Importing a project

The exported data from other personal computers can be imported as project data.

Configuration data

Description

Project information

Information on the sensor registered in this project.

Entire sensor information

Entire sensor information.

Tool setting information

Information on tool setting parameters for each sensor registered in this project.

3-2 Switching operation modes p.98

Menu bar: Click [File

] - [

Export

]

to select.

Menu bar: Click [File

] - [

Import

]

to select.

Note

Important

Содержание ZW-7000 Series

















































































































































































































































































































































Результаты поиска

Содержание ZW-7000 Series

Отзывы:

Omron ZW-7000 Series, Руководство пользователя, Страница: 95 / 336

Результаты поиска

Содержание ZW-7000 Series

Отзывы: