Setting Sensing
136
ZW-8000/7000/5000
User's Manual
Multiviewer Explore
: [BankGroup] | [(Bank Data Name)] (double click)
→
Edit pane
: [Sensing setting] icon (
)
→
Sensing settings window : [Measurement area 1] | [EdgeTracks]
• The track area can be set for a maximum of 4 surfaces within the measurement area.
• Exposure control mode: During automatic control, light adjustment is performed for the measurement surfaces that
exist within the measurement areas. The EdgeTracks function is not applied.
• Measurement surface: When set to peak, the measurement surface with the highest amount of received light is
selected from among all measurement areas.
Select either Edge1/Edge2/Edge3/Edge4 to use the EdgeTracks function.
• With ZW-7000
@
/5000
@
, this function is not available.
• If the following conditions occur when Area Teach is executed, an Area Teach error occurs.
- When no surfaces are detected
- When there are duplicate track areas
• If the following conditions occur after Area Teach is executed, the measurement value for each track area becomes
the clamp value.
- When multiple surfaces are detected in one track area
• If the following conditions occur after Area Teach is executed, a track area error occurs and the measurement value
becomes the clamp value until Area Teach is executed again. Execute Area Teach again to recover the track areas.
1
Set [EdgeTracks].
2
Set [Edge 1 track width], [Edge 2 track
width], [Edge 3 track width], [Edge 4 track
width].
The track width can be automatically set by
clicking [Automatic edge track width setting].
3
Click [Area Teach].
Sets the track areas of edges detected when
Area Teach is executed.
When the AreaTracks function is turned ON, the
EdgeTracks function automatically turns OFF.
Note
Edge 1
tr
a
ck
a
re
a
Edge 2
tr
a
ck
a
re
a
Edge
3
tr
a
ck
a
re
a
Edge 4
tr
a
ck
a
re
a
1
su
rf
a
ce
2
su
rf
a
ce
3
su
rf
a
ce
4
su
rf
a
ce
1
su
rf
a
ce
2
su
rf
a
ce
3
su
rf
a
ce 4
su
rf
a
ce
Important
Содержание ZW-7000 Series
