Omron ZW-7000 Series, Руководство пользователя

Страница: 166 / 336

Setting the Output Conditions
164
ZW-8000/7000/5000
User's Manual

Multi View Explore : [Bank Group] | [(Bank Data Name)] (double click)
→
Edit pane : [Task Settings] icon ( )
→
Task Settings window : [Hold]
Set “Trigger hysteresis” according to the fluctuation of the measured value near the trigger level. Hysteresis is applied
simultaneously with start of measurement to prevent chattering of the TIMING input.
Trigger
Set-
tings Trigger method Setting Valid value The period where the measurement value is a valid value is taken to be the
sampling period
When the delay time is set, the timing when the measurement
value becomes invalid value and when the sampling period is
finished are not synchronized.
Timing when the Setting Valid value finishes is after the sampling
period passed.
Trigger level -999.999999 to 999.999999
[mm]
(default value: 0) Set the self-trigger level when [SELF-UP] or [SELF-DOWN] are selected at
[Trigger method].
Trigger
hysteresis 0 to 999.999999 [mm]
(default value: 0.05% of
measuring range) Set the hysteresis width for the self-trigger when [SELF-UP] or [SELF-
DOWN] are selected at [Trigger method].
1
Set the hold mode.
Setting the Hold Mode p.160
2
Select the trigger method from [Trigger
method].
3
Enter [Trigger level] and [Trigger hysteresis]
when [Selfup trigger] or [Selfdown trigger]
are selected at [Trigger method].
The trigger can also be set by the operating keys on the Sensor Controller.
Setting Triggers p.252
Item Setting item Setting value Description
Me asu rement v a l u e
i s cl a mp s t a t us
Me asu rement
v a l u e
Sa mpling period
Sa mpling period
Me asu rement v a l u e
i s cl a mp s t a t us
Me asu rement v a l u e
i s cl a mp s t a t us
Oper a te point
Ret u rn point
Important
Important
Note