![background image](http://html1.mh-extra.com/html/omron/sysmac-c200h/sysmac-c200h_operation-manual_742423370.webp)
369
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Cat. No. W130-E1-05
Revision code
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision
code
Date
Revised content
2
July 1990
Complete update.
Information on the CPU11 added, including SYSMAC LINK/SYSMAC NET Link Systems, Error History and
Calendar/clock functions, and 14 additional instructions.
3
November
1991
Sections 7–1 through 7–4 have been incorporated into the present Section 4.
Condition and inverse condition have been changed to normally open condition and normally closed
condition.
References to block instructions have been deleted.
Page 6:
FIT has two floppy disk drives.
Page 19: For the SYSMAC LINK/SYSMAC NET Link Level error flags 25200 through 255203, link levels 0 and
1 have been interchanged.
Page 29: First and second interchanged in GR and LE flag descriptions.
Page 34: The instruction for entering TERMINAL mode is TERM(48).
MVFC(63), MVTC(64), and TRIG(69) have been changed to CTW(63) and WTC(64), and VCAL(69).
Page 95: Bit descriptions for the RWS(17) control word have been corrected.
Pages 114/5: In the examples for HTS(65) and STH(66), the execution condition is for 00000 and it should
be OFF.
Page 117: CNT 000 replaced with CNT 002 and 00200 replaced with 00201 in fourth branch of first dia-
gram.
Page 148: In SBS(91), nesting can be performed up to 16 levels.
Pages 189/90: SEND(90) added to instruction execution times table and OFF times for instructions (47)
through (49) have been corrected.
Sec 6-3: FAL(06) divided into 00 and 01 to 99.
Page 309: Word 19 corrected to 255 in table heading.
3A
September
1992
Page 33: Reset bit AR2114 corrected to AR2115 in the procedure.
3B
December
1992
Page 33: The possible values for bits AR 1800 to 1807 have been changed to “00 to 59” in the table.
3C
January
1994
Multipoint I/O changed to High-density I/O throughout the manual. Scan time changed to cycle time throughout
the manual.
Page 7: Available manuals updated.
Pages 7 to 10: LSS operations added.
Page 23: Top row in SYSMAC NET Link Systems table corrected.
Page 33: Note added.
Page 122: Limitations corrected.
Pages 220 and 223: Time required for Host Link Unit servicing clarified in the tables.
Page 221: Units added to the Special I/O Unit Refresh table.
Page 252: Note added.
Page 269 to 274: Appendix A completely updated.
4
August 2000
Precautions added.
CPU01, 03, and 11 changed to CPU01-E, 03-E, and 11-E throughout the manual.
Page 7: Available manuals updated.
Page 31: AR words in the table changed.
Page 99: Note added to the end of 5-4 Differentiated Instructions.
Page 113: Description about SV settings added to Limitations.
Page 117: Description about SV settings added to Precautions.
Page 265: CPU error message corrected.
Page 323: Description about flag statuses added.
Содержание SYSMAC C200H
