![background image](http://html1.mh-extra.com/html/omron/sysmac-c200h/sysmac-c200h_operation-manual_742423135.webp)
122
The present value (PV) will be incremented by one whenever CNTR(12) is
executed with an ON execution condition for II and the last execution condi-
tion for II was OFF. The present value (PV) will be decremented by one
whenever CNTR(12) is executed with an ON execution condition for DI and
the last execution condition for DI was OFF. If OFF to ON changes have oc-
curred in both II and DI since the last execution, the PV will not be changed.
If the execution conditions have not changed or have changed from ON to
OFF for both II and DI, the PV of CNT will not be changed.
When decremented from 0000, the present value is set to SV and the Com-
pletion Flag is turned ON until the PV is decremented again. When incre-
mented past the SV, the PV is set to 0000 and the Completion Flag is turned
ON until the PV is incremented again. CNTR(12) is reset with a reset input,
R. When R goes from OFF to ON, the PV is reset to zero. The PV will not be
incremented or decremented while R is ON. Counting will begin again when
R goes OFF. The PV for CNTR(12) will not be reset in interlocked program
sections or by the effects of power interruptions.
Changes in II and DI execution conditions, the Completion Flag, and the PV
are illustrated below starting from part way through CNTR(12) operation (i.e.,
when reset, counting begins from zero). PV line height is meant to indicate
changes in the PV only.
Execution condition
on increment (II)
Execution condition
on decrement (DI)
ON
OFF
ON
OFF
Completion Flag
ON
OFF
PV
SV
SV – 1
SV – 2
0001
0000
0000
SV
SV – 1
SV – 2
Program execution will continue even if a non-BCD SV is used, but the SV
will not be correct.
Flags
ER:
SV is not in BCD.
Indirectly addressed DM word is non-existent. (Content of
*
DM word
is not BCD, or the DM area boundary has been exceeded.)
Precautions
Timer and Counter Instructions
Section 5-12
Содержание SYSMAC C200H
