Omron OMNUC W R88A-NCW152-DRT, Руководство пользователя

Страница: 96 / 292

5.3 Parameter Details
5-43
5
„ Parameter Details
This section describes the parameter details about notch signal output positioning.
Notch Signal Position Designation
(Object: 0x64, Attribute: #160; Pn890)
Use the Notch Signal Position Designation to set whether absolute or relative positions are
set for the notch signal output position parameters.
Notch Signal (Object: 0x64, Attribute: #161; Pn891)
Use the Notch Signal to set the polarity of the notch signal output.
Negative Direction Notch 1 (Object: 0x64, Attribute: #162; Pn892)
Positive Direction Notch 1 (Object: 0x64, Attribute: #163; Pn893)
Use the Positive/Negative Direction Notch 1 to set the output position range for notch signal
(NOTCH 1). When the present position is inside this range, the status of the NOTCH 1 sig-
nal output is reversed based on the Notch Signal set in Pn891.
Negative Direction Notch 2 (Object: 0x64, Attribute: #164; Pn894)
Positive Direction Notch 2 (Object: 0x64, Attribute: #165; Pn895)
Use the Positive/Negative Direction Notch 2 to set the output position range for notch signal
(NOTCH 2). When the present position is inside this range, the status of the NOTCH 2 sig-
nal output is reversed based on the Notch Signal set in Pn891.
Table 5.21 Notch Signal Position Designation
Pn890 Description
0
Specifies absolute position.
1 Specifies relative position.
Table 5.22 Notch Signal
Pn891 Description
0
Sets NOTCH 1 signal.
1 Sets NOTCH 2 signal.
Table 5.23 Bit Meanings
Bit 0/ Bit 1 Description
0 Normally: OFF, When passed: ON
1 Normally: ON, When passed: OFF