Omron OMNUC W R88A-NCW152-DRT, Руководство пользователя

Страница: 282 / 292

10.2 DeviceNet Attributes
10-25
10
10.2.9 Trace Setting Object (0x67)
Class and instances of the Trace Setting Object (0x67) are shown below.
„ Class
• Attributes: None supported
• Services: None supported
„ Instances
Attributes (Instance #1: Explicit Message)
No. Access Name Data Type Description Setting
Range
Default
Setting
10
Get/Set Data Trace 1 UINT Specifies the data trace 1 target. 0 to 4 0
11
Get/Set Data Trace 2 UINT Specifies the data trace 2 target. 0 to 4 1
12
Get/Set I/O Trace 1 UINT Specifies the I/O trace 1 target. 80 to 8D Hex 83 Hex
13
Get/Set I/O Trace 2 UINT Specifies the I/O trace 2 target. 80 to 8D Hex 81 Hex
14
Get/Set Sampling Cycle DINT Specifies the sampling cycle.
Unit:
µ s
250 to
8191750 250
15
Get/Set Trigger Target UINT Specifies the trigger condition. 0 to 4 0
16
Get/Set Trigger Level UINT Specifies the trigger level. 0000 to FFFF
Hex 0
17
Get/Set Edge Type UINT Specifies the edge type. 0 to 2 0
18
Get/Set Pre-trigger UINT Specifies the amount of pre-trigger data. 0 to 999 0
19
Get/Set Start Trace UINT Specifies the trace execution status.
0: No-operation (initial status)
1: Trace Start Command
2: Trace Stop Command
0 to 2 0
20
Get Trace State UINT Stores the trace execution status.
0000 Hex: Initial status
0001 Hex: Tracing data.
0002 Hex: Trace completed.
(Read enabled.)
0010 Hex: Trace interrupted.
0011 Hex: Setting error
−
0