Omron OMNUC W R88A-NCW152-DRT, Руководство пользователя

Страница: 207 / 292

8 Servo Driver Settings
8.5.1 Selecting an Absolute Encoder
8-20
8
8.5 Absolute Encoders
If a Servomotor with an absolute encoder is used, a system to detect the absolute position can be
made in the host controller. Consequently, operation can be performed without performing an
origin search immediately after the power is turned ON.
Motor R88M-W ††††† T- † ···With absolute encoder
8.5.1 Selecting an Absolute Encoder
Select the absolute encoder usage with the following parameter.
“0” in the following table must be set to enable the absolute encoder.
Note This parameter setting goes into effect when the power is turned OFF and ON again after the
change has been made.
Always detects
absolute position.
Origin search
Absolute encoder
Pn002.2 Operation Switch When Using
Absolute Encoder Default Setting:
0
Uses the absolute
encoder as an ab-
solute encoder.
Pn002.2 Setting Description
0
Uses the absolute encoder as an absolute encoder.
1
Uses the absolute encoder as an incremental encoder.