Oki ES9160, Руководство по обслуживанию

Страница: 934 / 1087

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
05 Adjustmen
t mode Process Developer Automatic adjustment
of auto-toner sensor
2000 Fuser heater ON - - As the value increases, the sensor output increases
correspondingly. The value starts changing approx. 2
minutes after this adjustment was started and is
automatically set in the range of 2.35 to 2.45 V.
* Selection is disable when developer unit is not
installed. 17 Yes
05 Adjustmen
t mode Process Developer Correction of auto-
toner sensor
2001 Fuser heater ON 141 0~255 M Corrects the control value of the auto-toner sensor
setup in 05-2000.
* Selection is disable when developer unit is not
installed. 3 Yes
05 Adjustmen
t mode Process Developer 2020 Developer bias DC
output adjustment 141 0~255 M As the value increases, the transformer output
increases correspondingly. Remove the developer unit
and install the adjustment jig to make adjustment. 3 Yes
05 Adjustmen
t mode Process Charger 2040 Main charger grid bias
output adjustment Refer to
content
s
0~255 M As the value increases, the transformer output
increases correspondingly. Remove the developer unit
and install the adjustment jig to make adjustment.
<Default value>
95 3
05 Adjustmen
t mode Process Transfer 2052 Transfer transformer
DC output adjustment
(C) Refer to
content
s
0~255 M As the value increases, the transformer output
increases correspondingly. Remove the developer unit
and install the adjustment jig to make adjustment.
<Default value>
117 3
05 Adjustmen
t mode Process Separation 2078 Separation
transformer DC output
adjustment (C) 52 0~255 M As the value increases, the transformer output
increases correspondingly. Remove the developer unit
and install the adjustment jig to make adjustment. 3
05 Adjustmen
t mode Process Transfer Transfer cleaning bias
adjustment 2083 Positive Refer to
content
s
0~255 M When the high-voltage transformer is replaced, the
transfer cleaning bias needs to be adjusted with this
code. The larger the setting value is, the higher the
value of the current (more positive) is. This causes a
reduction in the toner adhering to the transfer roller and
an improvement in the cleaning performance. Perform
this adjustment after the process units (cleaner and
developer unit) have been removed. When the high-
voltage transformer is replaced, adjusting with the
following codes needs to be performed in addition to
this adjustment.
05-2020, 05-2040, 05-2052, 05-2078
<Default value>
96 3 Yes
1