Oki ES9160, Руководство по обслуживанию

Страница: 489 / 1087

8
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
8 - 9
EAE0 Finisher jam Receiving time time-out jam: The printing has been
interrupted because of the communication error
between the equipment and finisher when the
paper is transported from the equipment to the
finisher. P. 8-104
EAF1 Stack exit roller nip motor home position detection
error: The detection of the home position of the
stack exit roller nip motor ends abnormally. This
error may occur if paper is jammed while being
transported, so it is treated as a paper jam.
[MJ-1032/MJ-1033] -
EAF2 Stapler unit sliding motor home position detection
error: The detection of the home position of the
stapler unit sliding motor ends abnormally. This
error may occur if paper is jammed while being
transported, so it is treated as a paper jam.
[MJ-1032/MJ-1033] -
EAF3 Gripper arm motor home position detection error:
The detection of the home position of the gripper
arm ends abnormally. This error may occur if paper
is jammed while being transported, so it is treated
as a paper jam. [MJ-1033] P. 8-105
EB30 Ready time time-out jam: The equipment judges
that the paper transport to the finisher is disabled
because of the communication error between the
equipment and finisher at the start of printing. P. 8-105
EB50 Paper transport jam Paper remaining on the transport path: The multiple
feeding of preceding paper caused the misfeeding
of upcoming paper. P. 8-50
EB60 Paper remaining on the transport path: The multiple
feeding of preceding paper caused the misfeeding
of upcoming paper (redetection after no jam is
detected at [EB50]). P. 8-53
Error code Classification Contents Troubleshooting