Oki ES9160, Руководство по обслуживанию

Страница: 643 / 1087

8
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
ERROR CODE AND TROUBLESHOOTING
8 - 163
[CC30] Stack transport motor abnormality
* You receive a [CC30] error when the [EA70] error occurs three times in succession.
MJ-1101
MJ-1106
[CC31] Transport motor abnormality
* You receive a [CC31] error when the [ED12] error occurs three times in succession.
MJ-1101
MJ-1106
Classification Contents
Finisher related service call Stack transport motor abnormality: The stack transport motor is
not rotating or the stack transport belt is not moving normally.
Check Item Measure
Stack transport belt If there is mechanical problem when the stack transport belt is
moved, fix the mechanism.
Stack transport motor (M5) Check the connectors and harnesses between the stack
transport motor (M5) and the finisher control PC board (CN10).
Replacement part Measure
Stack transport motor (M5)
Finisher controller PC board
Check item Measures
Stack transport belt Move the stack transport belt.
Fix any mechanical problem.
Stack transport motor Check if the connector (CN17) on the finisher controller PC board is
disconnected from the stack transport motor (M8) and the
harnesses are open circuited. Correct if so.
Parts to be replaced Remark
Stack transport motor
Finisher control PC board
Classification Contents
Finisher related service call Transport motor abnormality: The transport motor is not rotating
or the stack transport roller -1 and -2 is not rotating normally.
Check Item Measure
Stack transport roller If there is mechanical problem when the stack transport roller -1
and -2 are rotated, fix the mechanism.
Transport motor (M2) Check the connectors and harnesses between the transport
motor (M2) and the finisher control PC board (CN5).
Replacement part Measure
Transport motor (M2)
Finisher controller PC board