Oki ES9160, Руководство по обслуживанию

Страница: 27 / 1087

2
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
2 - 3
Account Codes ........................ 10,000 codes
Department Codes .................. 1,000 codes
Warming-up time ..................... Approx. 20 sec. (temperature: 20°C)
Power requirements ................ AC 110 V / 13.2 A, 115 V or 127 V / 12 A
220-240 V or 240 V / 8 A (50/60 Hz)
* The acceptable value of each voltage is ±10%.
Power consumption................. 1.5 kW or less (115 V series, 200 V series)
Super Sleep mode: 1 W or less (When the damp heater switch is set to
OFF, and only 1 FAX line is used)
* The electric power is supplied to the RADF, (ADU), Finisher, Job Separator, Offset Tray, PFP and
LCF through the equipment.
Total counter............................ Electronical counter
Dimensions of the equipment............ See the figure below (W 575 x D 586 x H 756 (mm))
* The height includes the surface of the original glass.
* When the tilt angle of the control panel is 7 to 84 degrees.
Fig. 2-1
Weight ..................................... Approximately 61 kg (134.48 lb.): include the developer material and
drum
5 8 6
7 5 6
5 7 5
7 - 8 4 °