Oki ES9160, Руководство по обслуживанию

Страница: 391 / 1087

6
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
SETTING / ADJUSTMENT
6 - 83
6.15 Adjustment of the Finisher (MJ-1033)
Notes:
Before performing each adjustment, make sure that all covers (incl. those of the finisher and
equipment) are closed. Otherwise, no power is supplied to the Finisher and the adjustment may
not be performed properly.
6.15.1 Saddle stitching position adjustment
[A] Saddle stitching position adjustment (LD/A3)
This adjustment is performed in the Adjustment Mode (05-4820-0) of the equipment.
[B] Saddle stitching position adjustment (LG/B4, 8K, A4-R/LT-R, 16K-R)
This adjustment is performed in the Adjustment Mode (05-4820-1) of the equipment.
6.15.2 Saddle stitch folding position adjustment
[A] Saddle stitch folding position adjustment (LD/A3)
This adjustment is performed in the Adjustment Mode (05-4821-0) of the equipment.
[B] Saddle stitch folding position adjustment (LG/B4, 8K, A4-R/LT-R, 16K-R)
This adjustment is performed in the Adjustment Mode (05-4821-1) of the equipment.
Adjustment scale 0.2mm
Adjustable range -3.4 mm to 3.4 mm
Adjustment direction Increasing the value The stitching position moves downward
against the center position.
Decreasing the value The stitching position moves upward against
the center position.
Adjustment scale 0.2mm
Adjustable range -3.4 mm to 3.4 mm
Adjustment direction Increasing the value The stitching position moves downward
against the center position.
Decreasing the value The stitching position moves upward against
the center position.
Adjustment scale 0.2mm
Adjustable range -3.4 mm to 3.4 mm
Adjustment direction Increasing the value The folding position moves downward against
the center position.
Decreasing the value The folding position moves upward against the
center position.
Adjustment scale 0.2mm
Adjustable range -3.4 mm to 3.4 mm
Adjustment direction Increasing the value The folding position moves downward against
the center position.
Decreasing the value The folding position moves upward against the
center position.