Oki ES9160, Руководство по обслуживанию

Страница: 794 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
REPLACEMANT OF HDD/PC BOARDS
9 - 30
9.3 Precautions for Installation of GP-1070 and Disposal of HDD/
Board
9.3.1 Precautions for Installation of GP-1070 and Disposal of HDD/
Board
When installing the Data Overwrite Enabler (GP-1070), perform the following setting:
3C -> 6. Erase HDD Securely: HDD securely erasing
This setting is the overwriting method complying with DoD 5220.22-M.
1. LOW: This is the normal overwriting method. (This setting is used normally.)
2. MEDIUM: This overwriting method is more secure than LOW. The erasing time is between
and HIGH.
3. HIGH: This is the most secure overwriting method. It takes the longest time to erase data.
4. SIMPLE: This is the simple overwriting method. It takes the shortest time to erase data.
9.3.2 Precautions when disposing of the SYS board
When disposing of the SYS board, data clearing is not required since important data, such as user
information, etc. are stored in the SRAM board.
9.3.3 Precautions when disposing of the SRAM board
When disposing of the SRAM board, perform 3C -> 7:Erase SRAM Securely (SRAM securely erasing)
for security reasons.
Notes:
If these codes are performed, the equipment cannot be started up.