Oki ES9160, Руководство по обслуживанию

Страница: 791 / 1087

9
© 2012 OKI DATA CORPORATION All rights reserved ES9160 MFP / ES9170 MFP
REPLACEMANT OF HDD/PC BOARDS
9 - 27
9.2.10 Firmware confirmation after the PC board/HDD replacement
After replacing the PC board/HDD, check the firmware version in the setting mode (08) and confirm if
the firmware combination is correct.
The installed ROM versions and the registered optional Electronic License Keys can be confirmed in
the list print mode following the procedure below.
(1) Turn the power ON using the main power switch while pressing the digital key [9] and the
[START] button simultaneously.
(2) Key in “1” three times, and then press the [START] button.
(3) “VERSION LIST” is printed out.
*
It is recommended to keep this list for future reinstallation such as the replacement of the SYS
board.
(4) Keep pressing the [ON/OFF] button until you hear a sound to shut down the equipment.
Firmware Code Remarks
Updating Master data
(HDD program data) 08-8952 HD data internal version
08-9900 System software version
Updating System ROM
(OS data) 08-9930 System ROM version
Updating Engine ROM
(Engine firmware) 08-9901 Engine ROM version
Updating Scanner ROM
(Scanner firmware) 08-9902 Scanner ROM version
Updating RADF ROM
(RADF firmware) 08-9903 RADF ROM version
Updating Finisher ROM 08-9904 Finisher ROM version
Saddle stitcher ROM version
08-9944 Hole punch unit ROM version
08-9945 Converter board ROM version
Updating FAX ROM 08-9905 FAX ROM version