Oki ES9160, Руководство по обслуживанию

Страница: 488 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 8
EA40 Finisher jam
(Finisher section) Cover open error:
The front cover or stationary tray cover is opened
during paper transport. [MJ-1101/MJ-1106]
Finisher cover open jam:
(1) A paper jam occurs when any of the covers is
opened during the transporting of paper in the
Finisher (until the paper exit is completed after the
B command has been received).
(2) A paper jam occurs when the supplying of the
voltage of 24V is stopped during the transporting of
paper. [MJ-1032/MJ-1033]
P. 8-96
P. 8-96
EA50 Stapling jam: Stapling is not performed properly.
[MJ-1032/MJ-1033] P. 8-97
EA60 Early arrival jam: A paper jam occurs because
paper from the equipment arrives at the Finisher
too early. [MJ-1032/MJ-1033] P. 8-98
EA70 Stack exit belt home position error: The stack exit
belt is not at the home position. [MJ-1101/MJ-1106] P. 8-98
EA80 Finisher jam
(Saddle Stitcher
section) Stapling jam: Stapling is not performed properly.
[MJ-1032/MJ-1033] P. 8-100
EA81 The detection of the home position of the saddle
stitch 3rd transport roller drive motor ends
abnormally. -
EA90 Door open jam: The delivery cover or inlet cover
has opened during printing. [MJ-1106] P. 8-100
EAA0 Paper remaining in Saddle Stitch Finisher: Paper
remaining in Saddle Stitch Finisher [MJ-1106] P. 8-101
EAB0 Paper transport jam in Saddle Stitch Finisher:
Paper transport jam in Saddle Stitch Finisher
[MJ-1106] P. 8-101
EAB1 Short paper jam: Short paper jam (Saddle Stitch
Finisher) [MJ-1106] P. 8-103
EAC1 The detection of the home position of the folding
blade motor ends abnormally. -
EAD0 Other jam Print end command time-out jam: The printing has
not finished normally because of the
communication error between the SYS board and
LGC board at the end of printing. P. 8-75
Error code Classification Contents Troubleshooting