Oki ES9160, Руководство по обслуживанию

Страница: 1009 / 1087

05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
mode Printer Paper
feeding 4131 Feeding retry setting 0 0~1 M 0: ON 1: OFF 1
08 Setting
mode Printer Paper
feeding Paper size for bypass
feed PPC 4140 255 0-255 SYS Press the button on the LCD to select the size. 9
08 Setting
mode Printer Paper
feeding 4143 Paper size (Envelope:
Monarch-
R)feeding/widthwise
direction 191/98 148~432/9
8~297
M 10
08 Setting
mode Printer Paper
feeding 4144 Paper size (Envelope:
CHO-3-
R)feeding/widthwise
direction 235/12
0
148~432/1
05~297
M 10
08 Setting
mode Printer Paper
feeding 4145 Paper size (Envelope:
YOU-4-
R)feeding/widthwise
direction 235/10
5
148~432/1
05~297
M 10
08 Setting
mode Printer Paper
feeding 4206 Paper size (Postcard)
feeding/widthwise
direction 148/10
0
148~432/1
00~297
M * Postcard is supported only for JPN model. 10
08 Setting
mode Printer Paper
feeding 4450 Switching of paper
pushing amount/lower
drawer 0 0~1 M Switches pushing process by the transport roller when
paper loaded from the lower drawer starts to be
transported from the registration section.
0: The paper is pushed until its trailing edge reaches the
position where the 2nd transport sensor is turned OFF.
1: If the length of the paper is more than 297 mm, it is
pushed by the transport roller for a specified time. 1
08 Setting
mode Printer Feeding
system/Pa
per
transport 4542 Switching for incorrect
size jam detection 0 0~1 M 0: Enabled 1: Disabled 1 Yes
08 Setting
mode Printer Paper
feeding 4547 Manual stapling time-
out period 15 3~30 M 3-30sec.(In increments of 1sec.) 1
08 Setting
mode Printer Finisher 4548 Finisher model
switching setting
value 0 0~1 M Sets the model of the finisher.
0: MJ-1032/1033/1101/1106
1: MJ-1032/1033/1101/1106 1
08 Setting
mode Printer General 4549 Detection setting of
new or old fuser unit 0 0~1 M 0: Enabled 1: Disabled 1
32