Oki ES9160, Руководство по обслуживанию

Страница: 622 / 1087

ES9160 MFP / ES9170 MFP © 2012 OKI DATA CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 142
MJ-1101
MJ-1106
[CB13] Finisher exit motor (M11) abnormality
MJ-1101/MJ-1106
[CB14] Paper pusher arm motor (M10) abnormality
MJ-1101/MJ-1106
Check Item Measure
Buffer roller If there is mechanical problem when the buffer roller is
rotated, fix the mechanism.
Buffer roller drive motor (M6) Check the connectors and harnesses between the buffer
roller drive motor (M6) and the finisher control PC board
(CN18).
Replacement part Measure
Buffer roller drive motor (M6)
Finisher controller PC board
Check Item Measure
Buffer roller Rotate the buffer roller.
Fix any mechanical problem.
Buffer roller drive motor Check if the connector (CN11) on the finisher controller PC
board is disconnected from the buffer roller drive motor (M4)
and the harnesses are open circuited. Correct if so.
Replacement part Measure
Buffer roller drive motor
Finisher controller PC board
Classification Error item
Finisher related service call
Check item Measures
Exit roller • Is there any mechanical problem when the exit roller is
rotated?
Exit motor (M11). • Motor check
• Connector check
• Harness check
Finisher control board • Connector check (CN13)
• Board check
Replace parts Remarks
Exit motor
Finisher control board
Classification Error item
Finisher related service call
Check item Measures
Paper pusher cam • Is there any mechanical problem when the paper pusher
cam is rotated?