Ochsner AIR FALCON 212, Руководство по эксплуатации

Страница: 36 / 88

36 www.ochsner.com | OTS_EN
Time program
1 Changeover point to standard target value
2 Changeover point to reduced target value
3 Circuit for which the time program is valid
4 Standard target value
5 Reduced target value
6 Save
Designation Description
Changeover point to
standard target value
At the start of each day, you have to set a
starting point to define the target value used
to start the day.
Press and hold to define new changeover
points and to delete old changeover points.
Changeover points can be moved by press-
ing and sliding. The level of accuracy of the
setting can be changed by pressing and
sliding to the side.
Changeover point to
reduced target value
Circuit for which the
time program is valid
Each time program displays the relevant
valid circuit. The drop-down menu allows
you to switch between the individual time
programs.
Navigate directly to the associated time pro-
gram from each main screen.
The anti-legionella time program and the
DHW circulation pump time program can be
accessed via a main screen and the drop-
down menu or via the menu.
Normal target value The switching times between the standard
target value and reduced target value can
be set individually for each day. The tem-
perature is regulated to the standard target
value in the red area.
Reduced target
value
The switching times between the standard
target value and reduced target value can
be set individually for each day. The tem-
perature is regulated to the reduced target
value in the blue area.
Designation Description
Save Before closing the time program, the chang-
es must be saved. All unsaved changes will
be lost when you close or change to another
time program.
»
Create and move the changeover points to adapt the
heating periods to your personal requirements.
»
Save the changes you make.
»
Return to the main screen.